(800) 853-2651
SHOP NOW

farmall/international?

F

farmallsuperc

Member
theres a international industrial tractor coming up for sale at a auction this weekend.. with a loader, 3pt hitch, pto, and hydraulics. can i use thit tractor for every thing i would use a normal international/farmall tractor for. like plowing some small couple acre fields. and pulling trees out of the woods. and maybe running a 3pt backhoe on the back?
 
It has about the same power as the B-414. Not the strongest horse on the block. It has an intrigal frame which was designed for loader work. Since it has 3 point you can do what you want within horsepower limits. You will probably be limited in traction for plowing or wet conditions because it probably has industrial tread rear tires. Except for the tire issue, it should handle anything a B-414, I-424 or I-444 will.

Harold H

 
I'm not familiar with the shuttle tranny in this model, but a lot of shuttle transmissions are not made for "field work", so you might want to check that out.
 
how much horsepower is the b-414 im not familiar with that model. and i think the rear tiers are normal farm tiers worn down a little. but i could replace them so it would have better traction. and i was also wondering does it have extra hydraulics so if i wanted to put a 3012 backhoe on the 3pt i would be able to attach the hydraulic hoses to the tractor?
 
Well it should handle a 3-12s plow and a 8 ft. cultivator. The three point hitch is good. You can put a small back hoe on it if the hydrolics can handle it. I have one on my kubota and it works great. The shuttle is nice also, that makes loader work a lot easier. You dont need a 90 hp tractor for the small acreage you have this should handle what ever you need. Erik..
 
The B-414 has about 35 PTO HP and about 31 DB HP which would be the same on the 3414. I don't know how the shuttle transmission would hold up on heavy tillage work. Several different hydraulic pumps were available so I don't know how much hydraulic capacity this 3414 has, but, the 3414 was designed for loader/backhoe work so you would probably be in good shape for a backhoe. Worse case senario, you could add a front mounted pump for the backhoe. They were normally mounted with a 3012 or 3014 backhoe when ordered from the factory.

Harold H
 
You must log in or register to reply here.

Similar threads

C
3pt hitch goes up and down but will not maintain a position when stopped it goes back up
2
Replies
34
Views
995
camfire
C
M
IH 340 Utility Backhoe Attachment
Replies
10
Views
267
bc
B
B
Farmall Fast Hitch Plowing
Replies
10
Views
978
Absent Minded Farmer
Absent Minded Farmer
L
Farmall/International Super A Industrial
Replies
3
Views
363
Jim Becker
J
M
Trying to figure out PTO & Tractor ID request.. 1950s IH 300 utility..?
Replies
6
Views
440
MARK ROBKE
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top