460 Wide front

Anonymous-0 · Jan 21, 2010

does a 460 wide front fit a 350 farmall

rustyfarmall · Jan 22, 2010

You may need to change the rear yoke, but other than that, should be a direct swap. I can get you the correct rear yoke if needed.

D Slater · Jan 22, 2010

The only difference between a 460 and 560 farmall wide front is the spindle shafts size for the wheel bearings and hubs. Putting either on on a 350 requires the stay rod ball bracket change or modification as Rusty said and the steering arm change or modification. Support bracket is to wide for the 350 and height is off a little. Steering arm has a wider bolt spacing and bolt size than a 350. If not using the 460 or 560 hubs, special bearings or spacers may be needed to install the 350 hubs.

460 Wide front

Anonymous-0

Well-known Member

rustyfarmall

Well-known Member

D Slater

Well-known Member

Similar threads