Farmall C touch-control control valve ??

mike in new mexico · Jan 19, 2010

What position do you install the control valves into the valve body? I know they are marked and have put them into the correct holes but they can still be 180 degrees out. By marked, I mean there is a single notch on one and two notches on the other. The left side has one and the right is the one with two. Do the notches go up or down? Thanks--MIKE

tractorsam · Jan 20, 2010

As long as you have the spools in the correct bore (the one they came out of) then their rotation inside the spool doesn't matter. It will likely shift during use anyway. Sam

Farmall C touch-control control valve ??

mike in new mexico

Member

tractorsam

Well-known Member

Similar threads