706 hydraulic lever goes all the way

Rtkman706 · Jan 17, 2010

I was working with my loader yesterday, and came back today to find that my right hydraulic lever goes all the way forward and does not engage the hydraulics. I had it tied back with a bungee but let the tension off at the end of the day. Any ideas?

IaGary · Jan 17, 2010

Did you inspect the pins in the linkage to see that they were all there?

Gary

mazemeister · Jan 17, 2010

if all the linkage is intact- full forward is the "float" position. if you mean the lever falls to the floor, then your linkage came loose

Rtkman706 · Feb 1, 2010

It was the linkage pin. I removed the cover in front of the seat, dug out 3" of dirt/debris and found the broken pin.

706 hydraulic lever goes all the way

Rtkman706

Member

IaGary

Well-known Member

mazemeister

Member

Rtkman706

Member

Similar threads