300 Farmall

RDJ Farms · Jan 17, 2010

I am going to look at a 300 Farmall this week and I was wondering if there was anything on this model that needs to be looked at closer than normal? Does this model have a live pto? Also was axu hyds standard equipment? And what other models take the same mounted equipment? (like cultivators, ect.) Thanks

Harold H · Jan 17, 2010

The Farmall 300 is the same frame size as derived from the Farmall H. Most have a IPTO but it was optional and some are only equipped for a standard PTO. Live hydraulic were standard but the number of hydraulic valves varies. Two point fast hitch was also optional and now many have been converted to or added three point hitch. As far as mounted implements like cultivators, middle busters, etc, most front mounted implements that fit an H or SH will fit the 300 and the rear section will fit if you don't have two or three point hitch. If you do, you will have to have a two or three point rear section to go with the mounted front section. Also, some front mounted implements will only work with tricycle front whereas some will work with wide or tricycle front. Most likely I would think you will be using three point hitch rear mounted equipment however.

Harold H

RDJ Farms · Jan 17, 2010

Thanks. I am going to go look at it and see whats there. I need another Farmall to go with my Cub, 100, and Super C(in progress). I have a M parts tractor but I guess I can save it for another project.

Pat-CT · Jan 17, 2010

You definitly want to make sure the steering is not worn and you want to make sure the T/A is working correctly if it has one (most do)

300 Farmall

RDJ Farms

Member

Harold H

Well-known Member

RDJ Farms

Member

Pat-CT

Well-known Member

Similar threads