farmall 200 hydraulics

kuntryboy · Jan 16, 2010

if isolate my 2pt cylinder, i can put 2 remote hydraulic outlets on my 200. our rake only has 1 hose. how can i use the same outlet to raise and lower the rake? it wouldn't be sensible to change from one to the other.

Anonymous-0 · Jan 17, 2010

I belive the block thats bolted down in the back under the seat has a check (load)valve in it,I would buy a two way cylinder for the application.

Randy in NE · Jan 18, 2010

The 200 is not going to have a large enough hydraulic reservoir to operate a one-way cylinder. As you extend the cylinder it is draining all of your oil out of the system. With a two way system, as you extend the cylinder the oil on the back side of the piston is pushed back into the system via the second hose. That way the volume in the system remains constant. With a one way cylinder, the weight of the implement is what pushes the cylinder piston back and causes the oil to flow back through the one hose.

farmall 200 hydraulics

kuntryboy

Member

Anonymous-0

Well-known Member

Randy in NE

Member

Similar threads