Farmall H brake shaft bearings

oppie_25 · Jan 13, 2010

And good tips on changing the bearings on the brake shafts (bull gear). I am assuming I will have to take the back cover off. Well I found out the hard way anyhow. I now need the housing that holds the inner and outer bearings.

Janicholson · Jan 13, 2010

Changing them with the cover off is easiest, but requires removing the cover. Block the bull gears up from below before removing the axles. Then just pry lift them back to clear for removal. Many posts in the archives. Clean all fragments out of sump. JimN

Farmall H brake shaft bearings

oppie_25

Member

Janicholson

Well-known Member

Similar threads