Hey Allen - Info on 1066 Front End Overhaul

I got that axle pivot pin out this evening after much pounding with big hammer and drift. Actually, it was more of a problem getting that little anchor pin out as it was really rusted in. The bushing in the axle had only a couple thousands left until completely worn thru. My vote is for the way the red shop does it as that is the way I did it and it just felt safer and lot less work. The bushing just barely clears the bottom of the bolster jacked up all the way but it clears.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top