For Nebraska Kirk

jeffkoh

Member
just read one of your posts on the hand clutch for an h. was planning on pulling a 2-14 plow with my super h with a m&w clutch. not a good idea? can i get a copy of the m&w clutch manual from you?
 
I am sure the clutch would handle it fine, as long as it is adjusted correctly it will not slip even under very heavy load. I have a '47 M with a hand clutch and I have plowed a few times with it, even in very hard ground. I have powered out and spun out without any sign that the hand clutch was slipping.

The manual recommends not to do any heavy pulling. My personal opinion is that, as long as the clutch is in good shape and adjusted correctly, some occasional plowing will not hurt it. I would be hesitant to plow all day for days on end like what these tractors did originally. Keep in mind that heavy pulling puts extra stress on the M&W clutch parts, very few replacement parts are available new and a limited supply of used parts.


I do not have a manual specific to the Super H clutch, but I do have one for the Super M clutch, the information would be the same, just the part numbers in the parts diagram would be different. Send me and email or PM.
 
need your email address nebraska kirk, yt would not let me contact you. my address is available on yt. thanks.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top