1486 Brakes

Nates90 · Dec 29, 2009

I was wondering what the proper way to adjust the brake senser on the cover of the brakes. I just changed the brakes about 25-30 hours of service ago, and now the brake light is coming on when I press the right brake petal. I am thinking that I didnt get the senser adjusted right. I was also wondering if they would wear abnormal if something was binding up, but you would think i would feel the brake binding. I thought about taking it all back apart and get a caliper to test the thickness but I really dont want to dig that deep if I dont have to. Thanks in advance.

pete 23 · Dec 29, 2009

With engine running, press and hold pedal down (I just push pedal and flip the locking lever over to hold pedal down a bit) then loosen lock nut on sensor, screw it out until free, turn it in until makes contact with tab on disc, turn back out one and a half turns, lock it. If you have the seperators installed in correct sequence that will take care of it.

1486 Brakes

Nates90

Member

pete 23

Well-known Member

Similar threads