wheelie bars for H

Bill Bowen · Dec 25, 2009

Could you guys point me in the right direction to either buy or make a set of wheelie bars for my H. Thanks Bill

Mark (EC,IN) · Dec 25, 2009

Here Ya Go

http://www.external_link.com/

..................Mark

Mark (EC,IN) · Dec 25, 2009

better link
Here Ya Go

CJ_1080 · Dec 25, 2009

Find a set of the axle clamps that the hitch bolts to and build off them. Obvieously they are strong building points, the hitch is bolted to it and you can pull a house with the draw bar. Just my 2 cents worth. Good luck

sflem849 · Dec 26, 2009

Ditto on the axle clamps. Just don't build them off your original hitch, but your rules probably already state that.
I have heard A LOT of bad things about Denny's. His customer service is very poor and he does not stand behind his products. You can also find a lot of stuff for much cheaper than he offers it. ie carbs at Matt Gall Motec Engineering I have only called there once and he was not a cool dude and that was that.

Tom/Idaho · Dec 26, 2009

Where are you located? Tom/Idaho [email protected]

Bill Bowen · Dec 26, 2009

Yes I called Dennys once about wheelie bars was told out of stock.Had no idea when they would have them.

sflem849 · Dec 26, 2009

(quoted from post at 07:58:46 12/26/09) Yes I called Dennys once about wheelie bars was told out of stock.Had no idea when they would have them.

You wouldn't really need a set of axle clamps. There isn't anything to them but a piece of angle and a piece of square with two holes. With that said, they are pretty much free at the junkyard so you might as well buy them

DandK · Dec 30, 2009

Call me at 41-230-4297 I have a set that will fit

wheelie bars for H

Bill Bowen

Member

Mark (EC,IN)

Member

Mark (EC,IN)

Member

CJ_1080

Member

sflem849

Well-known Member

Tom/Idaho

Member

Bill Bowen

Member

sflem849

Well-known Member

DandK

Member

Similar threads