(800) 853-2651
SHOP NOW

hooking up no. 30 power loader on h

A

Andrew Kappers

Member
Trying to the the no. 30 hooked up on the h. I got the loader connected but not sure how the hydraulics are supposed to run. The top side of the cylinders have hoses that connect in the middle at a t junction. The bottom to are connected together with a quick connect setup. Could someone send me some pictures or describe to me how the hoses are supposed to be attached so that I can start getting some snow moved. Thanks, andy
 
The top hoses are for a two-way system and you only have a single way system. So un hook the top hoses and but breather caps in the ports. Now if you want to convert your system to two-way operation thats another deal but it can be done. How does the bucket work manual trip or does it have a cycl. If it has a cycl you will need to convert your systen to two-way. You need to post more info.
 
Alternative set up -- Connect the top hoses to a "T" and connect the combined line to the filler pipe on top of the pump -- this is often dune with pipe.

I have seen atleast two hooked up this way. If you have any leakage in the cyclinder seals, the oil will be returned to the pump.
 
(quoted from post at 02:11:44 12/17/09) The top hoses are for a two-way system and you only have a single way system. So un hook the top hoses and but breather caps in the ports. Now if you want to convert your system to two-way operation thats another deal but it can be done. How does the bucket work manual trip or does it have a cycl. If it has a cycl you will need to convert your systen to two-way. You need to post more info.
Click to expand...

No. The top portion of those cylinders is a reservoir for hydraulic oil because the belly pump does not hold enough oil to fully extend the cylinders. Those cylinders are NOT 2-way cylinders. The top hoses need to be connected to the filler pipe for the belly pump. Installing a breather in the top portion is guaranteed to spray oil all over the tractor and you when the loader goes all the way to the top. Ask how I know.
 
You must log in or register to reply here.

Similar threads

Kcavery2019
Power beyond Plug
Replies
13
Views
540
jean claude marleau
J
7
No down pressure for loader bucket now???
Replies
5
Views
587
706man
7
P
90 Series case remote coupler locations??
Replies
2
Views
341
want@1070
W
A
Yanmar 226 Hydraulic issues with loader
Replies
2
Views
294
winston-HT
W
D
Farmall h no start
Replies
5
Views
550
used red MN
U
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top