3-point designs

linemanfarmer · Dec 16, 2009

Would you guys have some pictures of some 3-points you have designed just for your h or m. Mine will be on an M. Thanks much

sflem849 · Dec 17, 2009

Send me an email. I just got some pictures of one on Craigslist. The guy is asking $100, I think it will be mine

It looks like a decent design. Not all hokey with a bunch of sloppy cut steel, etc.

Terry Bahler · Dec 18, 2009

I made a 3 point for my M this summer. It was more work than I had planned, but it came out okay. I got my rock shaft from a MM. (It wasn't made for a 3 point.) I also got the lift arms from another MM, and made it all fit together. I used quarter inch thick square stock 2 inches and 2 1/2 inches so they could slide into each other and then pinned. I used a sawzall for all my cuts which wasn't nearly as bad as drilling all the holes. Here are some pictures. Isn't this a marvelous forum? T Bahler

Terry Bahler · Dec 18, 2009

I'll try again for pictures. T Bahler

3-point designs

linemanfarmer

Member

sflem849

Well-known Member

Terry Bahler

New User

Terry Bahler

New User

Similar threads