Super A Block Heater

Derrick In NY · Dec 16, 2009

I was wondering if anyone knows if there is way to tap into the cooling system on a Super A to hook up a circulating block heater. Also it is a 1948 and does not have a water pump if that makes a difference.

Andrew Z · Dec 16, 2009

make sure that you have the proper oil, coil or mag is 100%, carb 100% and a good battery with 00 cables and you shouldnt have a problem. if you really want a heater, then you could use a magnet block heater that would be easy.

Andrew

teddy52food · Dec 16, 2009

If kept in good shape, it will start in most cold. It is hard to put a good heater on them. If it gets so cold that it doesn't start you won't want to use it anyway. But if you must , you can drain the anti-freeze and heat it up to 212 and pour it back in slowly to warm it enough to start.

gene bender · Dec 17, 2009

You can put one in the lower radiator hose area just find the on that fits there. Now if you have a good battery and starter and cables it will start using 5-30 oil in the engine. Mine start and the other day was well below zero and it started rite up.

Super A Block Heater

Derrick In NY

Member

Andrew Z

Well-known Member

teddy52food

Well-known Member

gene bender

Well-known Member

Similar threads