(800) 853-2651
SHOP NOW

Hyd pressure Check

R

RDJ Farms

Member
What is the best way to check the hyd pressure on a Farmall 100? And also can remote hyds be hooked up on this machine? If it can, what do I need to hook it up?
 
It's taken at the rear flange on the manifold, where it mates up to the T/C block. The gauge replaces the 1/4" pipe plug toward the rear.

40-50 psi on the low end, 1100-1500 on the high before the safety valve pops.
 
You need an adaptor for remote hydraulics. I think Steiners has them but they probably buy them from the guy who makes and sells them on eBay.

Goto:

Business & Industrial > Agriculture & Forestry > Antique Tractors & Equipment > Parts > Farmall

and search for "hydraulic" or maybe "adaptor". Price will be about $40.
eBay
 
Thanks for all the help. When using the block on ebay what type of auxiliary controll valve is used? Can you still get a valve like the ones that came on the super c with the fast hitch?
 
(quoted from post at 04:39:59 12/14/09) Thanks for all the help. When using the block on ebay what type of auxiliary controll valve is used? quote]

Email the eBay seller. He will tell you whether open or closed center. You can then decide whether you want single or double acting.

I'll bet he has a website with good imstallation instructions. If not, they will probably come with the adaptor.

I bought a similar Cub adaptor from IH at least 30 years ago to run a dump trailer when digging out the barn cellar. They work fine but I can't remember the installation details. At any rate, you can buy the adaptor with confidence. You won't be disappointed.
Click to expand...
 
The hydraulic system on a 100 is the "open center" type, so you would need a open center control valve.
 
You must log in or register to reply here.

Similar threads

R
Brazing Nut onto Stripped Farmall 140 Steering Box Mounting Hole
2
Replies
26
Views
885
RTR
R
J
986 leaking hyd oil 3pt
Replies
4
Views
265
the tractor vet
T
5
check front rim straightness
Replies
7
Views
279
kris Jensen
K
J
Ih 606 not starting
Replies
8
Views
337
Janicholson
Janicholson
D
International 784 engine oil pressure
Replies
7
Views
283
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top