Of the 16 head studs on my Farmall M, 4 of them are 'long' (about 1/4 inch longer than the others). I took them out to have the block reworked and now it's time to put them back but I'm not certain where two of the four long studs go.
Two of them go under the governor control bellcrank bracket, but does anyone remember where the other two go?
My best guess, based on the drawing in the parts manual, is that the long studs all go in the same row. There are seven studs outside of the valve cover and it looks as though the long studs may go (from front to back) in positions 2, 3 and 5,6 (bell crank bracket).
Any information is most appreciated. Thanks in advance.
Two of them go under the governor control bellcrank bracket, but does anyone remember where the other two go?
My best guess, based on the drawing in the parts manual, is that the long studs all go in the same row. There are seven studs outside of the valve cover and it looks as though the long studs may go (from front to back) in positions 2, 3 and 5,6 (bell crank bracket).
Any information is most appreciated. Thanks in advance.