Will IH 1000 Loader work on SAV?

Bud W · Dec 4, 2009

I had intended to install a IH1000 Loader on my SAV. A question has come up regarding if the Bucket will rest on the ground due to the height of the tractor. They are normally installed on Cubs and SA's. I would hate to install this guy just to find out the bucket rests 6 inches off the ground. Anu ideas? Thanks

Zach Bouchard · Dec 4, 2009

After I posted yesterday I was thinking of that but I was looking and I think if the Hydrualic Cylinder is short enough i think it would work. The boom wont hit anything but if the cylinder was shoerter it would work.

erik dekeyser · Dec 4, 2009

It looks like it might fit, if it doesnt touch the ground you might be able to redrill the hole where the cylinder mounts to the loader frame. Just drill a new hole a couple of inches ahead of the hole thats in there now. That would be cheaper than a new cylinder. Erik..

mkirsch · Dec 4, 2009

One thing I forgot to mention...

The lift cylinder isn't fully retracted with the bucket resting on the ground on my SA. I just don't know if there's enough retraction left to account for the height difference between an SA an SAV.

Tom Coughlin · Dec 4, 2009

It should work. There is still some travel left in the cylinder.

Zach Bouchard · Dec 4, 2009

Thats kinda what I thought looking at the picture.

Will IH 1000 Loader work on SAV?

Bud W

Member

Zach Bouchard

Member

erik dekeyser

Member

mkirsch

Well-known Member

Tom Coughlin

Member

Zach Bouchard

Member

Similar threads