350U Draft Control Linkage

Does anyone have a 350U with the draft control. This is the setup that has a handle to the left of the tractor near the rockershaft. Our setup is missing parts/broken and I would like some pictures of a complete setup so we can get ours back together. Mainly need a picture of the handle, and the piece that holds the handle in place.
Thanks
 
No pictures, ours is gone long ago. I remember the top bracket as having a blade spring holding the handle lever into its slots. The spring came up from the bottom and pushed against the handle spine.
No complexity. Jim
 
My 300u/350u parts manual has a good pictorial of the Draft Control.
The IH Case parts website should have the same thing.
If it does not I will scan it.
Dell
 
OK, that was one of my questions. The handle with the notches is intact, but the piece that the handle hooks into broke off. So the handle slots hook onto the tab that sticks out from the rocker shaft? Then there is a flat spring that holds the handle in place?

Also, the parts break down show some flat springs that bolt to the underside of where the fasthitch slides it. Are these part of the draft control or are they to hold the drawbar from moving around?
Thanks
 
The flat springs put pressure on the fasthitch prongs so that they can't (or shouldn't) come loose -- any fast hitch implement.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top