Farmall 400 clutch finger height?

Nebraska Kirk · Nov 25, 2009

I need to know what the clutch finger height should be on my Farmall 400. I have an owner's manual but don't have a service manual for this tractor. I also have a C-264 engine service manual but it does not address the clutch. Any help would be appreciated!!

SDE · Nov 25, 2009

2 and 5/16

Nebraska Kirk · Nov 25, 2009

(quoted from post at 16:59:16 11/25/09) 2 and 5/16

Thank you for responding. I assume I am supposed to measure from the backing plate directly under the finger?

SDE · Nov 25, 2009

Disregard previous post.
Free length 3.156 from the top of the finger to the bottom surface, without any tension or preload on the springs.
The manual shows two dimensions that are used to set the height with the pressure plate bolted in place.
I bolted my pressure plate to a piece of flat metal. Use a spacer under the cover plate that measures 1.03. Now the height of the finger should be 2 and 5/16 from the top of the finger to the surface that the pressure plate is bolted to.
SDE

Farmall 400 clutch finger height?

Nebraska Kirk

Well-known Member

SDE

Well-known Member

Nebraska Kirk

Well-known Member

SDE

Well-known Member

Similar threads