Dan Swanson
Member
Have a chance to buy an M that is in really good shape,farmhand F11 loader, after market three point, good tires, starts and runs good. $3000.00
The question I have is on the wide front it is mounted using an "L" shaped casting that mounts about 16" back from the front of the tractor. It hasn't been broken and the truss rods that are attached to the casting and then runs towards the back are in good shape. How stout is this set up? Not going to be lifting large heavy round bales or the such. Will it handle 1000# or less? Mostly will use the tactor for light row crop work. But the loader is handy at times. Any tips? Thanks, Dan
The question I have is on the wide front it is mounted using an "L" shaped casting that mounts about 16" back from the front of the tractor. It hasn't been broken and the truss rods that are attached to the casting and then runs towards the back are in good shape. How stout is this set up? Not going to be lifting large heavy round bales or the such. Will it handle 1000# or less? Mostly will use the tactor for light row crop work. But the loader is handy at times. Any tips? Thanks, Dan