560 Shifting

I"m having trouble getting my 560 out of gear when it is stopped (just got it). If I shift out of gear before a complete stop, it is fine. When I can"t shift out of gear, its almost like the brakes are on. Is this a characteristic of the TA?
 
when it gets to where you cant get it out of gear try pulling the ta back iit should shift easy then . if that works your clutch and ta needs the linkage adjusted. shop manuals usually tell how yo do this. it must be just right on to work right but when you get it right it will work well. we have a 460 with ta on our farm since 79 and have used it hard .the ta works just as good as when we got it. two motor overhauls and 4 clutches later.hope this helps pc
 
I was having that problem with mine so I adjusted
the clutch and TA. I followed the IH manual, but
I'm no tractor mechanic. It didn't make any difference with the problem. I also had little
clutch play. The clutch would either be out or in, not much in between (makes it hard to ease
a load without a lot of hopping). Long story short, I now have a new clutch and no more problem.
 
Yes, I figured the over running clutch in the TA would help if the pressure were forward. I haven"t tried it yet so don"t know if it will help. But if the TA were the reason, it would seem to only help in one direction of pressure. I figured if I knew the mechanism, I could fix it.

The 560 is a lot big for my place but I have dreamed about owning and driving one since I was 12. I am enjoying it and enjoying the restoration. May never use it much on my place but that"s fine.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top