(800) 853-2651
SHOP NOW

IH364 diesel pwr steering cylinder

F

fixitforfree

Member
I am in need of a power steering assembly for my IH364 diesel (BD154). This unit lays longitudinal with the tractor out on the left hand side. I bent the rod in mine, had it straightened but while realized several other parts are worn out while I had it apart and it would be best to find a good used assembly. Can any of you help me or point me to someone that could?
 
Thanks Jim. I'm not sure myself but some of these models sound familiar and I would agree. You have any idea of anyone that might have these parts I could contact - any true IH guy that could help me out?
 
Just now noticed you listed the 444 as having the same PS cylinder. It did not have one like my 364. It had a simple double end cylinder in the front center of the tractor that ran transverse to the tractor. My tractor has the cylinder run parallel to the tractor out on the left side. My tractor has a double gear pump. The front pump runs the lift, the rear pump runs the ps cyl. The 444 has 1 gear pump that runs all of it.
 
Hi, you are correct for the USA assembled 444 but Canadian 444 used same PS with the cylinder on steering link. Some of these UK build tractors were shipped in pieces to somewhere in USA where they were assembled and some parts were used that were common to other USA build IH tractors.
JimB
 
Hi Fixit, Does your PS look like the following?

I have no connection to the following salvage yard but they have several of the British built Diesels as these tractors were very common as a loader tractor in Canada.

See: http://www.fawcett.cc/index.html

JimB
EQ-FT1711-B414-0610-1.jpg
 
JimB2, that's actually shown on what fawcett says is an IH B414 but the cylinder on my IH364 is exactly the same. I've called them and they sell the assembly including the cyliner, pump, lines, anchor - everything for $1400! Wow...

I might be able to use cylinder but need a lock ring (IH p/n 3048489R1) that is not available any longer. Fawcett is checking to see if they have a damaged cylinder that they could rob this lock ring for me.

Thanks for your help. I like this old tractor but parts are so hard to find for it, it's really discouraging...
 
You must log in or register to reply here.

Similar threads

T
Case-IH 895 steering question.
Replies
15
Views
414
Texasmark
T
D
3000 Ford Steering Cylinder
Replies
2
Views
166
Sean in PA
S
A
IH 384 Diesel
Replies
11
Views
398
JimB2
J
P
350 U steering Quick update
Replies
4
Views
227
Paul 300 U
P
4
Ford 821 low pwr steering pressure
Replies
13
Views
589
nashranch
N
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top