TD-9 Rear Main Seal

Dan Woodall · Nov 3, 2009

I have developed a major oil leak on my TD-9 at the rear main. The past summer I attempted to replace it by going through the openening in the clutch housing. I quickly found out I could not get the flywheel out and reassembled it leaving it for a later date.
So, is the best way to replace the seal by moving the engine foward, or is it possible to get to it througn the clutch housing? If so, how? Thanks in advance, Dan.

moseed · Nov 4, 2009

(quoted from post at 21:16:56 11/03/09) I have developed a major oil leak on my TD-9 at the rear main. The past summer I attempted to replace it by going through the openening in the clutch housing. I quickly found out I could not get the flywheel out and reassembled it leaving it for a later date.
So, is the best way to replace the seal by moving the engine foward, or is it possible to get to it througn the clutch housing? If so, how? Thanks in advance, Dan.

Hi,
Go to Red Power "Construction"page. You are looking for the "King of Obsolete". Don't know anyone has more real knowledge on TD-9's than him.
Good Luck!

TD-9 Rear Main Seal

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Dan Woodall

New User

moseed

Member

Similar threads