Clamshell fenders for an M

Rick E C · Nov 2, 2009

Are these the same size as the clamshells for a C but with a different mounting system?

Andrew Z · Nov 2, 2009

they are diffrent a C and M have diffrent mounting brackets. you need to find a set from C Super C 200 or 230 are all mainly the same and will interchange.

Andrew

Deano4863 · Nov 2, 2009

I have a set of clam shell fenders that I would sell. They came off of a 504 but are on my H now. They will bolt to an M. I have them bolted direcly to the axle without the extension/spacer plates. From my understanding these were manufactured in the late 50's to the early 60's before the flatop fenders came out. These are a completely different mounting system from a C. From what I remember the C fenders use a bracket that clamps around the axle.

Brian Schmidt · Nov 2, 2009

You guys are missing his point. He is asking if the fenders are the same with different mounting.

Yes, the upper part of the fenders are identical. I have both in the barn and laid them side by side. Yes, the mounting is much different. Hex axle tube on the C style, and a flat four bolt mount on the H&M style.

mkirsch · Nov 3, 2009

Yes, and it wouldn't take much work to fab up some brackets to make one type of fender work on the other type of tractor...

The H & M fenders are much less expensive aftermarket.

Clamshell fenders for an M

Rick E C

New User

Andrew Z

Well-known Member

Deano4863

Member

Brian Schmidt

Member

mkirsch

Well-known Member

Similar threads