(800) 853-2651
SHOP NOW

SH Starter

D

Deano4863

Member
Hi Guys,

I working on a 53 Stage 1 Super H. The starter has been replaced with one that has a threaded stud to hook the battery cable to. It also had a cobbled up relay with keyed ignition switch. I want to convert the starter back to the original with the saddle type starter switch. What is involved in that?
The foot start lever is still on the tractor but the rod is gone. I should be able to fab one up but would rather have an original one. Any body have one or a source for one?
 
Does the starter you have have the threaded holes for the starter switch?

If so, the threaded stud can simply be replaced with one with the contact on top for the starter-mounted switch. The stud will need to be soldered to the copper buss bars... a job for a HEAVY soldering copper and some experience.

It SHOULD even be possible to exchange the stud and drill and tap 2 holes for the switch, saving the expense of a different starter.
 
You must log in or register to reply here.

Similar threads

D
Repairing glow plug/starter switch wiring farmall 504
Replies
18
Views
574
BarnyardEngineering
BarnyardEngineering
P
Cub starter question
2
Replies
27
Views
865
560Dennis
560Dennis
B
starter solenoid
Replies
18
Views
994
used red MN
U
P
McCormick IH624 1968 - problem with the starter switch
Replies
2
Views
242
JimB2
J
F
Can I use a Jet Star 3 starter on the original Jet Star?
Replies
7
Views
366
flatheads & vacuum tu
F
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top