Author [expand]	[Modern View]
M Sailer 10-30-2009 18:39:24 64.90.94.80 735710 Report to Moderator	Im having trouble finding the correct wire order for the distributor of a 4-cyl 56' International 300U. I know the firing order but believe the wires are not in the corresponding locations on the cap. Can anyone help? [Reply]   [No Email]
Janicholson 10-30-2009 18:48:42 64.61.211.1 735713 Report to Moderator	Re: distributor wire order in reply to M Sailer, 10-30-2009 18:39:24   If it is like from the factory, it is (looking from the back) 2-1 4-3 If someone indexed the distributor it could be at a different location for #1, but the order is still CW, and in that progression. Putting #1 cylinder on TDC compression stroke (pushes your thumb out of the hole with air), then turned to the TDC timing mark. assures you of number one's location, the rotor will point to it. JimN   [Reply]   [No Email]
M Sailer 10-30-2009 18:57:48 64.90.94.80 735716 Report to Moderator	Re: distributor wire order in reply to Janicholson, 10-30-2009 18:48:42   That pretty well cleared up my question. Thanks JimN,   [Reply]   [No Email]