Author [expand]	[Modern View]
Dellbertt 10-29-2009 15:36:25 209.172.21.194 735536 Report to Moderator	Works smooth now. No grinding from neutrol. I trained about 3 gals of cruddy oil out of the trans drain. They had it way over filled. Ran it with a gal of diesel then drain and rinse it back through several times. Then rinsed twice with clean diesel and fill to the fill hole with new 80-90. I don't know why that fixed it but it shifts smooth and easy now from all configurations. (And the leaks stop too) Thanks for the help. Dell PS. The steering box was leaking watery out the shaft so I drain about 2cups of water and some stinky oil and refilled with clean 80-90 just to the fill hole and that to is no longer leaking. [Reply]   [No Email]
Janicholson 10-29-2009 18:33:30 64.61.212.187 735576 Report to Moderator	Re: SA Tran Follow UP in reply to Dellbertt, 10-29-2009 15:36:25   Great outcome for potential bad news. JimN   [Reply]   [No Email]
ScottyHOMEy 10-29-2009 15:52:40 71.241.200.35 735539 Report to Moderator	Re: SA Tran Follow UP in reply to Dellbertt, 10-29-2009 15:36:25   Good job! And thanks for the follow up!   [Reply]   [No Email]