(800) 853-2651
SHOP NOW

Where do I check and fill hydraulic fluid

M

mike keefe

New User
I have a Int. 340 utility with a Wagner Iron Works loader. I can not find any where to check the hydraulic fluid level or to add to it. Any help would be great.
 
Is this front pump loader,If it it's on the tube frame there is vented fill plug as the tube frame is also the reservior.Can't remember where level check is. Hope this helps. Scott
 
The level plug is under the clutch rod by the left foot rest on the tractor and th fill plug is by gear shift if you are talking about the tractor.
 
Is it possible that the Wagner loader pump drew its fluid from the 10 or so gallons of Hy-Tran in the rear frame and clutch housing? To find out, trace back the inlet hose of the pump.

I have recently installed two pumps on my 400. Both draw tractor fluid from the tractor.
 
The hydraulic reservoir on a normal 340 is in the transmission and rear end.

The hydraulic reservoir on a normal 400 is in the pedestal under the dashboard. Wardner's 400 is far from normal :)
 
Thank you all for the info.
The big quistion now becomes is the Hydro fluid in the trans the same as in the loader. I do know where to check the trans fluid as well as fill it. I checked it and it is a different color than the loader fluid milkey so i know I should replace. So clearly I am not sure what way to go based on the responses I have gotten. I will try the suggestions I have. Any other suggestions would be appricated. Thanks again
 
Again thank you all. I found a Wagner Iron site on the web. The Hydraulic fluid is filled at the vented fill plug as Scott wrote. To check if it is filled you measure from the fill pipe and the fluid should be 4 inches below the base of the filler pipe.
 
You must log in or register to reply here.

Similar threads

F
Hydraulic fluid fill location on 187D
Replies
3
Views
227
fosterdude-HT
F
C
Super M hydraulic question
Replies
8
Views
632
D Slater
D
M
how to check pwr steering fluid Int 404
Replies
1
Views
170
used red MN
U
R
1973 Ford 7500.
Replies
2
Views
384
Ray1962
R
T
Massey Ferguson MF80 where, check, and what oils
Replies
0
Views
142
Tractor NewB
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top