Distillate pipe gasket?

Mike CA · Oct 23, 2009

Does anyone know if there should be a gasket between the manifold and the pipe on a distillate manifold? I took my pipe off, and there is one there, but when I looked up the part number, it doesn't exsist!

So should one be there? If so, what's the part number?

Thanks!

tractornumtmd · Oct 23, 2009

mike just get gasket material and remake one
easy as that

rustred · Oct 23, 2009

what i have done is make my own. get some asbestos, like good luck, and some thin tin and cut them out and sandwich the asbestos between the tin and you have a gskt. if all else fails.

Mr. Mayor · Oct 23, 2009

The parts book says no but I thought mine should have one. I went to the local auto parts store and purchased a sheet of exhaust manifold gasket material. You can find it online too, the brand that seems to show up all over is Mr. Gasket Co. I think it cost me about $14 for a 12x26? inch piece. Worked great, you can cut it with a scissors and razor knife and use a paper punch to open up the two bolt holes.

Mike CA · Oct 23, 2009

Ok, looks like I'll be making one then. Thanks guys!

Distillate pipe gasket?

Mike CA

Well-known Member

tractornumtmd

New User

rustred

Well-known Member

Mr. Mayor

Member

Mike CA

Well-known Member

Similar threads