856d valve setting

Anonymous-0 · Oct 10, 2009

I have a 856d need to know the sequence to adjust the valves.I have the plate off the bell houseing and the timeing marks and pointer clean. It has time marks and V marks. thanks joe

Anonymous-0 · Oct 11, 2009

Start with #1 cylinder TDC compression stroke(both push rods will be loose).Adjust valves on that cylinder. Rotate flywheel in the direction of rotation until #5 cylinder is at TDC. (You have to watch the valve movement on companion cylinders to know when you are at TDC. Companoin cylinders are 1&6 2&5 & 3&4. So when #2 exhaust valve just closes and the intake valve just starts to open and both push rods are tight #2 cylinder is at TDC exhaust stroke and you can adjust the valves on #5 which will be on TDC compression stroke.) Adjust valves on #5 cylinder and continue to rotate the flywheel in the direction of rotation 1/3 of a turn to adjust the next cylinder in the firing order. Firing order is 1-5-3-6-2-4. You will be able to adjust all 6 cylinders in two revolutions of the flywheel.
Chuck

Anonymous-0 · Oct 12, 2009

Thanks for the help joe

856d valve setting

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads