(800) 853-2651
SHOP NOW

Are there Wheel seals on a Farmall C?

R

Raymond in Co

Member
Are there Wheel seals on a Farmall C? I couldn't find them in any catalogues or online. My 1949 leaks where the axel stubs leave the tractor body. How do I stop it, and if they are seal, what is the size or part number? Thanks

R
 
You need a parts manual. In the absence of that, go to www.caseih.com and look at the parts diagram--you need to become familiar with that anyway. Have a bearing/seal place (NAPA, etc)cross the IH number to a National or Chicago Rawhide number, or order from your CaseIH dealer if you have one close. The inner seals-next to the differential are the problem, there is not supposed to be oil in the axle housings.
 
As CNKS says, there is not supposed to be oil in the axle carrier (the cast piece that contains the axle). The outer bearing is only lubed by the grease fitting unless oil is leaking past the inner seal which is at the transmission end of the axle. Replacing that inner oil seal is a pretty big job, so if the leak is not too bad, you might just want to live with it or possibly do only the outer seal which only requires removing the wheel from the axle. However, It's likely replacing the outer seal will only slow down the leak not get rid of it.
 
You must log in or register to reply here.

Similar threads

S
Farmall Super C main seals
Replies
4
Views
732
gene bender
G
W
rear wheel seals leaking
Replies
6
Views
674
winter411
W
N
OS4 Rebuild and Rear Crank Case Seals
Replies
1
Views
205
BarnyardEngineering
BarnyardEngineering
T
Case-IH 895 steering question.
Replies
15
Views
414
Texasmark
T
S
Farmall C and the Char-Lynn hydraulic pac
Replies
3
Views
398
caterpillar guy
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top