(800) 853-2651
SHOP NOW

100 starter is bad

C

couv

Member
Mine has the rear cover broken in 2 halves ( I guess the cast-in lip and 2 screws that hold the whole thing together DONT hold it together so well).

The bendix spring appears to have over-stretched according to our starter guy, it didn"t have the proper number of washers on the front end of the drive, and no washers behind the bendix. If I remember correctly, one of my starters had a felt washer on the armature side of the bendix get all tangled up in the bendix, so I just pulled it out.

Anyone got a good Delco Remy back cover ? I can get a bendix, and we think the rest of my starter is usable ?
 
With the original style drive there should be three washers on the drive end and one on the brush end. The two on the ends have the smaller ID and control the armature end play. The other two on the drive end have a large ID and slip over the shaft and control the forward movement of the drive. When you change to the newer drive without the spring you leave those two washers out, they are no longer required.
 
You must log in or register to reply here.

Similar threads

Poppy Johnny
Searching for a Delco Remy starter thrust washer..
Replies
3
Views
454
Muir hill 101
M
K
1943 Farmall H transmission project and mouse problem
Replies
5
Views
417
BarnyardEngineering
BarnyardEngineering
Z
MF65 G-176 better starter
Replies
1
Views
699
ziegler
Z
C
H starter
Replies
6
Views
2K
caterpillar guy
C
N
Case 830 starter
Replies
2
Views
331
casecollectorsc
casecollectorsc
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top