(800) 853-2651
SHOP NOW

Stuck Clutch Pedal

J

jeffnPA

New User
Started my all original usually bulletproof I6 today and the clutch pedal would not return.It will go into every gear but not come back to engage.It seems internal.What happened?
 

There is a return spring located inside the clutch housing. It probably broke. You can replace it from under the tractor.
 
When you say pedal, I take it you have a industrial 6 with a foot clutch and the pedal stays down even when foot is removed. If you can't see a problem on the outside. Unless something unusal happened to make the pressure plate stick in the released position the fingers should push pedal back most of the way, enough for tractor to go. Would check the sleeve the release bearing carrier slides on, fork and carrier for breakage or other problem blocking pressure plate engagment. You may be able to see whats happening through the inspection hole on bottom. If not the top of clutch housing will need removed.
 
(quoted from post at 04:37:39 10/05/09)
There is a return spring located inside the clutch housing. It probably broke. You can replace it from under the tractor.
Click to expand...

OOPs, there is no access to it from underneath. You need to remove the top cover.
 
You must log in or register to reply here.

Similar threads

D
Free up a stuck CUB clutch?
Replies
15
Views
498
BearGap
B
T
656 Clutch problem
Replies
6
Views
580
Tradesman
T
F
Did the "mechanic" lie about my clutch too? Very dangerous condition
2
Replies
31
Views
1K
cleddy
C
D
Ford 3000 Clutch issues
2
Replies
20
Views
868
Btzj02
Btzj02
W
2N Clutch pedal modification
Replies
3
Views
408
boler76
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top