Manifold torque on bolts ? for A

tackhammertime · Sep 28, 2009

I had a crack in the manifold welded today new gaskets will be here Tuesday I found in my manual that th torque is 25# but is there a sequence to torque them. Thanks

ScottyHOMeY · Sep 28, 2009

Just like nailing down a board. Go either one end to the other , or middle first then the ends.

Where was the crack?

tackhammertime · Sep 28, 2009

Thanks Intake side on the side you see in front of the main body it was about 1"long. I have a cousin with a machine shop and he tig welded it with a nickel rod.

Jeff Z. · Sep 28, 2009

Start in the middle and work both sides together towards the ends. When you do this just snug them. Then go back and in the same order from center to ends and torque them to spec.

Manifold torque on bolts ? for A

tackhammertime

Member

ScottyHOMeY

Well-known Member

tackhammertime

Member

Jeff Z.

Well-known Member

Similar threads