My First Wiring Question (12 volt conv.)

WI Dave · Sep 26, 2009

I've gotten around to fixing the charging system on my 41 M. The alternator was no good, so I picked up a rebuilt one. The old wiring doesn't match any diagram I've seen, so I'll have to replace it all. I found Bob's diagrams in the archives and I can do most of the wiring, but my tractor has a push/pull kill-switch and the toe-switch for the starter. Can anybody give me a diagram or pic of the wiring for the kill-switch and the starter switch? The current wiring is a mess, with wires running everywhere and the 12 volt coversion wiring spiced into the original wiring harness. Any help would be appreciated.

rustyfarmall · Sep 26, 2009

The starter button that is activated by that toe push lever is the same starter button that is used on all of the letter series Farmalls. Granted it may in a different location, but it still wires up the same, and I believe the wiring diagrams show how it's done.

gene bender · Sep 26, 2009

You forgot the A@B@C use different st sw than the H-M series

My First Wiring Question (12 volt conv.)

WI Dave

Member

rustyfarmall

Well-known Member

gene bender

Well-known Member

Similar threads