47 baler Pitman yoke

valleyview · Sep 22, 2009

I'm looking for a Pitman yoke for the a late model 47 baler. IH is insane on their price and was wondering if someone had a parts baler that has a good one in it plus liners. I'm in East Central Iowa. Let me know what you may have and price.

Karl Hamson · Sep 22, 2009

I am not sure what you mean by pitman yoke. I have a 46 parts baler and I am sure
someone will chime in to tell us if the parts interchange. I am in BC Canada
Karl

valleyview · Sep 23, 2009

The yoke will fit off your 46 onto the 47. The yoke is the part that fits over the crankshaft under the front cover. The crankshaft comes off the side gearbox and is visible when you lift the cover. When the crankshaft is running it is pushing the Pitman (tube) back and forth pushing the plunger The yoke is the part that fits over the crankshaft at the front of the tube. It looks just about like a cap and rod assemble from a piston. It comes off with two bolts to take the front cap off and then one bolt out of the tube and it slides out. Take a look and tell me what you would have to have for it. Thanks, Mark

47 baler Pitman yoke

valleyview

Member

Karl Hamson

Member

valleyview

Member

Similar threads