Temp. gauge route

Achodges1 · Sep 20, 2009

I am putting a wireing harness and new gauges on a Super-C. Does the temp cable route the same as the wireing harness,under the battery box,through the channel under the touch-control,over the clutch,and along the head?

ScottyHOMeY · Sep 20, 2009

Sorta. Starting at the panel end,it follows the wiring harness forward through the last clip in front of the Touch Control. While the wiring continues straight forward, the temp wire crosses diagonally over the bell and passes through a clip fastened under the upper right bolt holding the torque tube to the motor. From there up and then forward through two clips in the right side of the head, and you're there.

gene bender · Sep 20, 2009

Does yours go to the water pump or does your head have aplace on the manifold side to the front.

Achodges1 · Sep 20, 2009

Thanks for the info. Craig

Temp. gauge route

Achodges1

Member

ScottyHOMeY

Well-known Member

gene bender

Well-known Member

Achodges1

Member

Similar threads