cub tractor mower pully L-22 part number457193R2 NEEDED

WE ARE IN A DIRE NEED FOR A CUB TRACTOR MOWER PULLY THE CASE IH NUMBER IS 457193R2 MY 84 YEAR OLD FATHER IN LAW IS HAVING A MOST DIFFICULT TIME LOCATING THIS. CAN YOU PLEASE HELP US ????? THANK YOU KINDLY :) PLEASE E-MAIL US AT [email protected] THANKS AGAIN
 
I have one for the PTO. It only has h-2 on it, no other numbers on it 8" in dia.
I have no idea if it will work. I think it's for a woods mower. Also have the two pluueys that go down on the draw bar. Good Lick.
 
That part is hard to find used. I've looked for a long time and not found one. You need a pulley close to the original size. 8" is way too big. The L-22 pulley runs much closer to the transmission than a Cub-22. So you cannot use a pulley from a Cub-22. For the same reason, you ARE able to use a pulley with a Browning tapered hub. That type pulley can be purchased from a number of sources. I got mine (4.5 inch diameter) from Grainger. Unfortunately, most of those places will not have a 10-spline hub. You can get a hub from a seller of rotary mowers (like Woods).

Although Jim in MA's pulley won't work, it may have a hub that fits.

My pulley can be seen in the last picture on this page:
http://www.tm-tractor.com/gim/22com_001.htm
 
ok, lets try this again. I just got a Cub that I'm going to strip some parts for one I'm working on. It came with a 4 1/2 pulley for a #22 mower. I don't know why but Mine has the cast number 451356 R2 Is that what you'r looking for? The pulley seems to be in good condition.
 
No, that is not what he is looking for. That is one of the two numbers for the Cub-22 mower. It will not line up with the lower pulley on an L-22 mower.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top