Rear rims for super m

Anonymous-0 · Sep 15, 2009

I'm looking at rims from a John Deere that have 13.6-38 tires. I have Farmall Super M that have decent rims that 38" and are 12" wide but the tires and rim from JD have the fluid already in and they would not need switching. The guy says JD rims have double bevel but does not know if they will work on the Super M. Does anyone know if these rims will work on my tractor? Thanks for any help! Larry

Anonymous-0 · Sep 15, 2009

If the rims were of an JD B, A, or G (drop center rims) they would fit on the IH cast centers for the H thru SMTA. Double bevel rims will fit 300-450 cast hubs. Chad

Anonymous-0 · Sep 15, 2009

The JD rims are double bevel and the width of area that wedges would clamp rims to hub is about 1 inch. That is about the same as what I have but wondering if everything else will work. Larry

sflem849 · Sep 15, 2009

Are 400/450 axles the same as an M? Could you use that setup on an M???

Anonymous-0 · Sep 16, 2009

Same axle spec, I have a 50 M with 560 centers, with 14 inch JD double beveled rims, I like that setup. Easier to find rims without widening a good stock set of IH rims. ChadS

Rear rims for super m

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

sflem849

Well-known Member

Anonymous-0

Well-known Member

Similar threads