Farmall 460 Water Temp Gage Receiver

Terry Morton · Sep 14, 2009

HELP!! I was replacing my water temp gauge and I unscrewed the sensor from the pipe (looks like a "T") and the pipe broke off in my hand. This is the part where the sensor from the water temperature gauge screws in on by the valve cover. I tried to find the part in the CNH and in my parts manual with no success. Any one have any idea what that part number is and what it is called?

Thank you for your help.
Terry Morton

CNKS · Sep 14, 2009

It's not repairable, you need a new gauge and sensor, they come as a unit. Steel wheel Ranch, Steiners, OEM Tractor Parts and others. UNLESS you mean the fitting it screws into, these are available from about any hardware store.

Terry Morton · Sep 14, 2009

Yep,
It is the fitting it screws into. Thanks Much!! I will go in the morning.
Terry

Owen Aaland · Sep 15, 2009

A gauge assembly comes with an adapter that screws directly into the cylinder head.

If you have a pipe and tee, they are standard pipe fittings that were not supplied by IH.

Farmall 460 Water Temp Gage Receiver

Terry Morton

New User

CNKS

Well-known Member

Terry Morton

New User

Owen Aaland

Well-known Member

Similar threads