trailer plow

Anonymous-0 · Sep 13, 2009

Just picked up a trailer plow. I know its a IHC plow but I don't know the model or any thing about it. The numbers I found on it are:top of beam P02840,on the hubs P02734(left) P02735 (right), back of mold board SC 528328R1 maybe SC523328R1. thanks for any help. Sorry, there's no pictures, yet. Scott

Hugh MacKay · Sep 14, 2009

Scott: Does this trailer plow have a tail wheel? If so, does that tail wheel lift back of plow via a linkage to left front wheel? Or is it a fixed tail wheel?

It takes considerable time to find these via part numbers. Answers to the above will narrow it down quickly.

Anonymous-0 · Sep 14, 2009

Hugh, It has a fixed steel tail wheel. Thanks for your reply. Scott

Hugh MacKay · Sep 14, 2009

Scott: Best did out the camera. Fixed tail wheel makes it a Little Wonder. No. 3 was single bottom, No. 1, 2 and 4 was two bottom plows According to my plow book all PO numbers for Little Wonder 3 and 4 are PO then 5 numbers rather than 4. The no. 1 and 2 go back into the 1920s and 30s and I doubt if plows that old would have any numbers ending in Rxx. those R didn't start until the 1940s.

trailer plow

Anonymous-0

Well-known Member

Hugh MacKay

Well-known Member

Anonymous-0

Well-known Member

Hugh MacKay

Well-known Member

Similar threads