Sleeves for F-30

Anonymous-0 · Sep 9, 2009

I need to pull the sleeves on my Farmall F-30, I ordered a disk for my sleeve puller but it is the wrong size. Does anyone have a Farmal F-30 sleeve laying around that could give me the outside diameter? Thanks Dave

El Toro · Sep 9, 2009

Call Rice Equipment at 814-227-9200 to see if they have a sleeve and can measure it. Your puck needs to be undercut to 4.05" to fit the bore of the sleeve. Hal
PS: Thefordsonhouse in MI may be able to help you too. 906-786-5120

RedRay · Sep 9, 2009

I just measured one and it is 4.75" at the bottom where it seals to the o-ring and steps up to 4.875". Gotta be careful as the bottom of the sleeve only hangs down past the web in the block maybe .187 or so. Good luck.

Sleeves for F-30

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Anonymous-0

Well-known Member

El Toro

Well-known Member

RedRay

New User

Similar threads