Engine block identification

cbna · Sep 4, 2009

I have a engine block it has a dip stick behind oil element a block off plate for fuel pump and a cut out on the right rear engine mouting flange. I think it is a c-113 or c-123 maybe c-135. The part no. on side of block is 356318 r-2 casting no.5-35-y the serial on block is IMAM-G 10651. I think it maybe a engine out of a windrower or combine maybe hay swather Thanks for any help mike

Dave_Id · Sep 4, 2009

It was cast in '53, the 113 part number was 2xxxxx, so it's not a 113.

Machine249 · Sep 4, 2009

I can't find anything matching those numbers on the Case website. I looked at a C-153 engine from a 201 combine a while ago and it I thought it may have been that, but the numbers are not the same. I assume it's a 4 cylinder gas engine. Is there any more info you can provide?

D Slater · Sep 4, 2009

It may be a 64 combine engine, not sure if it was a 113 or 123 but 3-1/8 is the biggest piston and sleeve set that will work. Information I have says that block needs to be 356318 R3 or higher to go bigger. Think it was 113 from what I see.

cbna · Sep 5, 2009

Dave it is a four cylinder it has a block off plate for hyd pump. Thanks for your help mike

Engine block identification

cbna

New User

Dave_Id

Well-known Member

Machine249

Member

D Slater

Well-known Member

cbna

New User

Similar threads