10-20 air cleaner

henryv1111 · Aug 26, 2009

We have our 10-20 painted, decals installed, and ready to go. What type of clamp held the oil cup to the air cleaner. In the old days we just had a wire on there. We would like to make it orginal.Thank you for any help.
Henry

spiffy1 · Aug 26, 2009

What year is that? It seems there was a change in the air cleaner, so the real early ones are beyond my knowledge; regardless, I'm thinking most had the wingnut configuration [with tabs on, or a bar across, the oil cup] but I haven't looked at mine recently.

henryv1111 · Aug 27, 2009

It is a 1930 according to the SN. I will try to make one using eye bolts and a bar across the bottom so it will look like yours
TX Henry

spiffy1 · Aug 27, 2009

I took a quick look this morning:

without a grabbing tape measure and calipers, I'm thinking your cup & the retaining parts might be directly interchangeable with a later Regular Farmall or a F-20 [from start to, perhaps, all the way through] even though the top casting would be different.

My 10-20, IIRC, is about a year newer than yours, but I'm rather sure it was several years earlier [if at all: sometimes I get 15-30 knowledge confused with that of the 10-20 despite, or maybe because of, the often overlapping technology] for the major change I was thinking of.

Good luck!

10-20 air cleaner

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

henryv1111

Member

spiffy1

Member

henryv1111

Member

spiffy1

Member

Similar threads