Hyra Touch Controler

Adrian · Aug 23, 2009

I have a 300u and was using the haybine. Problem is it will react instantly to the up position, but is very slow to go downward! I have the controler in the single stage. Whats going on, or not going on? Seems like the lever is not moving very freely. Thanks in advance

Janicholson · Aug 23, 2009

Two of the most probable:
THe lever is getting worn at the splines of the shaft in the valve. It happens a lot. If the valve is not going all the way into the down position, it will act that way. There could be a stone or dirt in the slot the lever runs in (been there)
A third possible is a restrictor (one way) could be in the hose or coupling. JimN

Hyra Touch Controler

Adrian

Member

Janicholson

Well-known Member

Similar threads