Adding a hydraulic cylinder to C

Dave And · Aug 21, 2009

I know this has been probably asked many times on this board but I"m having trouble finding the exact answer. I have a totall stock "48 C. I want to purchase one of the saginaw 3 point systems which appear to be very well made. My question is what all exactly would I need to purchase other than more hydraulic lines,to operate the cylinder for the three point. I don"t need to or will I want to run any other hydraulics, just the one on the three point. Im see the hydraulic block off plate for between the touch control or do I need more than just that? Will the touch then operate the rear cylinder?

Dave_Id · Aug 21, 2009

The 3 point will have it's own valve. Saginaw County Tractor has the valve and the block to slip in your system that you'll need. I used quick disconnects on mine, so that I could easily remove the entire hitch when I needed to mount my sickle bar mower.

ff in mich · Aug 21, 2009

Howdy, I have a super C, it has a lever on the rigth side of the tractor, i just ran to hoses from this to the cylinder on the saginaw hitch, you need 2 axel clamps to mount the hitch, it is realy easy to put it on, only takes a few minutes to put it on, its a great hitch, made here made rigth

Hugh MacKay · Aug 22, 2009

Dave: Dave Id is correct, you order from Saginaw complete hitch with control valve, it will come complete with everything you need. Give them every detail on how tractor is currently equipped.

It will increase their hitch price, but sure saves chasing the countryside looking for the parts you'll need.

Adding a hydraulic cylinder to C

Dave And

New User

Dave_Id

Well-known Member

ff in mich

Member

Hugh MacKay

Well-known Member

Similar threads