C oil pump

Russ from MN · Aug 8, 2009

I am going to reassemble my C oil pump next time I am at the cabin, and I am wondering if I should remove the whole pump sp I can really feel the rotation freeness. If I remove the two bolts from the outside with the retainer clip will the pump come right out, will I need any additional gaskets? I have plastigauge to check the clearance and will do that, I would just like to feel the pump rotate before I reassemble the engine. Thanks in advance!

Janicholson · Aug 9, 2009

It should be no issue. The rotation needs to be checked, but not with the plastigauge in it. It must be stationary for the gauge to be cleanly distorted once. .001-.0005" clearance is prime.
JimN

C oil pump

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Russ from MN

Well-known Member

Janicholson

Well-known Member

Similar threads