I-9 or W-9

sven · Aug 6, 2009

Lately I have been searching for a I-9, as I have been collecting the industrial series tractors from that era. I came across a complete tractor in Wyoming that at first I thought was an I-9. It had a foot throttle, solid cast hubs in the rear, and split rims. However the serial tag clearly says W-9 on it. I was wondering if these were options that your could get put on a regular w-9 from the factory? This tractor had the same fenders and platorm as a W-9. Does an I-9 and a W-9 have the same fenders and platform?
Thanks

Janicholson · Aug 6, 2009

My brother's I-9 in its current running but work cloths. I hope it helps some. JimN

glennster · Aug 6, 2009

from the tc-32d catalog on the w-9 series, including, w-9,wd-9, wr-9 and wdr-9, the following special attachments were available.
air cleaner extension pipe
pre cleaner
pre screener
exhaust muffler, exhaust pipe extension and spark arrestor
engine hour meter
belt pulley
power take off
service meter
swinging drawbar
drawbar pintle hook w-9 and wd-9 only
pneumatic tire pump both schrader and enginair
front wheel extension tire wr-9 and wdr-9 only
rear wheel extension tire
rear wheel lugs (grousers)
rear wheel overtire w-9 and wd-9
rear wheel overtire with rim w-9 and wd-9
front wheel weights
rear wheel weights
mud scrapers wr-9 and wdr-9
the rice versions had a foot decellerator, but no foot throttle.
i would assume that someone installed a foot throttle from an i-9 on the w-9 you were looking at. a lot of field modifications were made to a lot of old tractors!!

Harold H · Aug 6, 2009

The fenders and platform are different on the I-9 and the W-9. Someone must have installed a foot accelerator from the parts department or from a I-9 parts tractor.

Harold H

CNKS · Aug 6, 2009

And the I9 has faster gearing.

I-9 or W-9

sven

Member

Janicholson

Well-known Member

glennster

Well-known Member

Harold H

Well-known Member

CNKS

Well-known Member

Similar threads