706 D282

Tony L · Jul 26, 2009

I blew out the bottom radiator hose then about 5 roll bales later blew the top one. Then 20 rolls later the top of the radiator split. I am not getting oil in the radiator and not getting water in the engine oil. I know this can't be good. Yeah the hoses were looking pretty rough and the radiator for all I know is 40 years old. I did try a different radiator cap. Any Ideas or suggestions.

mattofvinings · Jul 27, 2009

My thoughts are you blew the head gasket from combustion chamber thru to the water jacket if you are reliably building pressure on the "water side" of the engine.

The fact the fluids aren't mixing tells me that your castings are probably still intact.

Tony L · Jul 27, 2009

I was afraid of something like that. That engine has about 7500 hours on it. The motor is still pretty strong. I guess I will fool with it this winter. Thanks

706 D282

Tony L

Member

mattofvinings

Member

Tony L

Member

Similar threads