Super M with MW clutch

Anonymous-0 · Jul 16, 2009

Do you have to remove the transmission cover to remove the M&W clutch or the bull pinion shaft on a Super M?

D Slater · Jul 16, 2009

No, the bull pinion shaft is special but everything comes out the side on a SM.

GeneMO · Jul 16, 2009

Is it different than a regular M? It says to " remove the LH bull pinion shaft bearing cage assembly"

If I remember right, my dad and uncle broke this when trying to install our clutch. They didn't realize the bull gear had to come loose. And they didn't take the cover off, but had to when it came time to put a replacement bearing cage in.

Years later, when I was a lot stronger, seems like we removed the bull gear bolt by removing the PTO and working through the PTO hole. I lifted that bull gear back in place, but dont think I could do it any longer.

I have the installation and maintenance pamphlet for an M, MD, W-6 and WD-6

Gene

D Slater · Jul 16, 2009

The bull pinions can be removed on IH disc brake tractors without removing the carrier housing. Several years since I messed with a SM one but pretty sure when he gets down to unbolting the adapter plate thats used to mount outside housing , the one that bolts to brake cover holes on a band brake M. That plate is what holds the bull pinion gear in on a disc brake tractor. They used a band brake on left like a regular M on there super set up. Do remember for sure removing and installing SM units from the outside.

scot in pa · Jul 18, 2009

I'm sure there is a trick to re4moving the carrier, but I don't know what it is. I think I tapped 3 or 4 screwdrivers in behind it and worked it out, and that there is a big ole o-ring that seals it.

Super M with MW clutch

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Anonymous-0

Well-known Member

D Slater

Well-known Member

GeneMO

Well-known Member

D Slater

Well-known Member

scot in pa

Member

Similar threads